Crosswater Optix 10 Brushed Nickel 1000mm x 800mm Offset Quadrant Shower Enclosure Set

Get away from it all with the Crosswater Optix 10 Brushed Nickel 1000mm x 800mm Quadrant Shower Enclosure Set.

This set includes a smooth, Creo A-grade anti-slip quadrant shower tray, which is made from crushed dolomite stones and topped with an anti-bacterial nano-gel coating which can be repaired if damaged. Install either flush to the floor, or if the plumbing needs to be installed beneath, using the Crosswater eight leg riser kit (sold separately – see required products) to raise it up. This 25mm low profile shower tray allows easy access in and out of the enclosure and its built in soundproofing helps you have a quieter showering experience. 

In the middle lies the 60mm drain and accompanying colour-matched, fully flush shower waste cover, which allows water through at a rate of 32lpm, but not large debris such as hair so it helps prevent blockages in the waste system.

Surrounding the tray and waste are the fixed, curved and sliding panels, which are made from 10mm toughened glass. The soft-closing door slides from 434mm and 446mm, depending on adjustments, along the quick release stainless steel rollers and is available to be purchased for left or right hand entry. The 304 grade stainless steel handle can be upgraded to knurled which makes it easier to grip with wet hands (see required products.)

This offset quadrant shower enclosure is rounded off with a smart brushed nickel trim which enables it to be matched with other bathroom fittings of the same colour.

Please note:

• Shower systems and valves are sold separately.
• This shower enclosure comes in a left or right handed orientation. (see dropdown menu)
• This enclosure requires a shower tray with a minimum ledge of 60mm. 
• Shower waste included.
• Door adjustment between 383mm and 395mm.