Abacus Elements 1200mm x 950mm Infinity Wetroom Former Kit

The Abacus Elements 1200mm x 950mm Infinity Wetroom Former Kit provides all the components necessary to create a luxury wetroom that sits flush to the floor, effortlessly draining water from your tiled bathroom floor. 

First included is a level access wetroom shower former measuring 1200mm in width and 950mm in length. You can choose from either left or right-handed installation, with the plastic ridge on either side. This former, 30mm thick, provides a flat shower floor with a slight gradient to allow water to run to the waste, ensuring easy access with no step involved. Removing the barriers typically posed by traditional wetroom shower trays offers a seamless experience for all users.

This pack also comes with a single fall waste with a high-capacity drain trap of 40 litres per minute, situated and attached to your wetroom wall. Topping this waste, a stainless steel-finished drain cover plate & trim as standard, with the option to choose from four different colours to coordinate with your bathroom's components.

Also included is a complete set of tools to ensure installation is as smooth as possible. 

Abacus recommends overboarding your floor with a 10mm board before laying down your floorboard.

• Please note: for Level Access installation only
• No envelope cutting required
• Ideal for large format tiles
• Supplied with Lustrolite tapered tile trim

The Installation and Drainage Kit Includes the following:

• Wood Floor Primer; Fix-KST; Fix-MD; Waterproof Tape; Waterproof Internal Corners; Tile Guide; Paint Brush; Protective Gloves; Notched Trowel; Horizontal and Vertical Shower Waste; and Stainless Steel Drain Cover.