The Sussex Range by JIS Lewes 560mm x 520mm Polished Stainless Steel Heated Towel Rail

The Sussex Range by JIS Lewes 560mm x 520mm Polished Stainless Steel Heated Towel Rail reimagines conventional towel rail architecture through its distinctive large gap concept.

Presenting an almost symmetrical profile of 560mm high by 520mm wide, this wall-mounted heated towel rail creates an immediate visual impact through its peculiar arrangement. The structure features two groups of three horizontal bars - one positioned at the top, the other at the bottom - separated by a commanding 340mm open middle expanse. This substantial gap not only creates architectural breathing space but also optimises towel-drying efficiency by encouraging airflow behind draped towels. To finish the design, a mirror-bright, polished stainless steel construction reflects light with brilliant clarity, making it an effortless addition to all modern bathrooms.

This design integrates seamlessly with your central heating infrastructure, delivering a heat output of 938 BTU (275W). For those looking for an upgrade and savings on running costs, this fixture can also be used as a dual-fuel rail. This means that either your central heating system or an independent electric heating element can heat the rail, allowing you to avoid relying on your central heating during warmer months.

Based on whether your plumbing connections emerge from the wall or the floor, dual-fuel adaptation requires either a standard or cylindrical heating element combined with dual-fuel valves or a comprehensive dual-fuel kit (incorporating a t-piece and element) alongside dual-fuel valves. If central heating operation is all you require, then you'll need only a standard heating element and profile valves. Consult the required products section for additional guidance.

Please Note:

• To make your dual-fuel conversion, select a dual-fuel kit and dual-fuel valves, or a heating element and dual-fuel valves from the required products section.
• For use with just central heating, select the standard heating element and profile valves from the required product sections.
• The standard element features a built-in thermostat to keep the temperature consistent, while the cylindrical element offers adjustable 4 heat settings and indicating LEDs.
• All elements are fitted on the right-hand side of the towel rail; left-hand elements are available on request.
• Standard bracket for 117mm projection included.